Seal and Gasket home
Home page Proposal
Standard Fabric
The Standard Fabric reinforced seals is widely used in heavy machinary and engineering material such as Rolling mill,Gear boxes etc.The material generaly used is NBR(Nitrile) for the sealing lip which is bounded outer body made out of hard and rigid fabric reinforced with NBR.This Seals prove most cost effective when Compare to other type of seals
 
Seals Profile
Detail
Housing Detail
The OSRC-1 types of shaft seals are used wherever additional lubrication is not necessary. In case lubrication required, seals installed back to back with a lubrication metal spacer.
The OSRC-2 seal is similar to the OSRC-1 type seal with additional slots provided on the back face of the seal to enable additional area for lubricating the sealing lip, thus preventing dry running or damage to the sealing lip.
The OSRC-3 seal is especially recommended for ensuring longer seal life.But in this case the housing has to be provided with a lubricating groove port

This Seals can be manufacure and supply in with single split(Straight cut) for easy installation avoidng costly and heavy dismentaling

Shaft speed:- Max 10 M/S
Pressure     :-0.5 bar
Temperature:- -30 to +100


. Seals, Seal, Gaskets, Metric, Oil, Hydraulic, Shaft, Mechanical, O-ring, MSO

home - products - contact us - proposal - disclaimer

. Seals, Seal, Gaskets, Metric, Oil, Hydraulic, Shaft, Mechanical, O-ring, MSOTeflon® is a register trade mark of dupont
Viton® is a registered trade mark of dupont performance elastomers